Home Products Water Makers High-Capacity Marine Water Makers ECO T/D 320 / ECO T 320 Pro Plus
HIGH-CAPACITY WATER MAKER
Aqua Prime ECO T/D 320 and ECO T 320 Pro Plus
The ECO 320 family is a published higher-capacity route between the 200 and 400 L/h classes. Aqua Prime’s current English table conflicts on production, daily output and running power, so ERBA Marine records the published values but confirms the selected version from current written documentation before supply.
Published values are preliminary selection references. Current specifications, units, dimensions, configuration, included components, documentation and applicable warranty terms must be confirmed in ERBA Marine’s written quotation.
ECO T/D 320 / ECO T 320 Pro Plus
Nominal 320 L/h family position; the current supplier table contains conflicting output and power references.
ERBA-Led Selection
Requirement review, technical clarification, quotation and supply through ERBA Marine.
Manufacturer Attribution
Aqua Prime manufactures the listed equipment; ERBA Marine manages selection, quotation and confirmed supply.
Current Data Check
Supplier inconsistencies are disclosed and resolved before quotation.
Documented Supply
Configuration and applicable warranty terms are stated in writing.
Selected and supplied by ERBA Marine
Aqua Prime is the manufacturer of the listed reverse-osmosis water makers. ERBA Marine keeps the customer journey inside ERBA: vessel-data review, model comparison, technical clarification, quotation and confirmed equipment supply.
Aqua Prime’s official dealers and services page lists ERBA Marine in Dubai. The selected configuration, included service scope, applicable warranty terms and after-sales route are stated in ERBA Marine’s written quotation.
Published model overview
Nominal 320 L/h family position; the current supplier table contains conflicting output and power references.
- ECO T, ECO D and Pro Plus naming references
- Nominal 320 L/h family position
- Compact or distributed layout review
- Published table conflict disclosed and checked before quotation
Important: Published values are preliminary selection references. Current specifications, units, dimensions, configuration, included components, documentation and applicable warranty terms must be confirmed in ERBA Marine’s written quotation.
Preliminary technical reference
- Published models: ECO T 320 / ECO T 320 Pro Plus / ECO D-320
- Electrical supply: 230/380 V, 50 Hz
- Published current: 17.8 / 6 A — supplier page does not map this pair to voltage/phase; confirm supplied version
- Published power: Product table: 3.5 kW; Aqua Prime FAQ: 3 kW running / 6 kW starting
- Operating pressure: 58 bar
- Production capacity: Table shows 320 L/h for one variant and 400 L/h for the other
- Daily production reference: Table shows 9,600 L/day for both variants; conflicts with a 320 L/h continuous-duty calculation
- Seawater / tank / reject: 1" / 12 mm / 3/4"
- Published membrane: 4040/2
- Published dimensions: 1300 × 510 × 480; Pro Plus 1300 × 600 × 480
- Published weights: 136 kg / 120 kg
- Motor speed / sound: 1,450 rpm / 75 dB
Supplier-data caveat recorded
- ECO 320 table mixes 320 and 400 L/h, shows 9,600 L/day for both variants and lists 3.5 kW while the manufacturer FAQ gives 3 kW running power for 320 L/h.
- AC paired current values are retained exactly because the manufacturer pages do not explicitly map each current to a voltage and phase.
- AC product pages can list a 220V panel voltmeter alongside multi-voltage or 380V equipment; ERBA Marine confirms the supplied electrical and control package.
TECHNICAL SELECTION DATA
What ERBA Marine needs before confirming a water maker
Good selection starts with verified demand, electrical, seawater, space and interface data.
Vessel and operating requirement
- Vessel type, length, operating profile and project location
- Required litres per hour and expected daily freshwater demand
- Expected operating hours and preferred redundancy
- Generator rating, simultaneous loads and starting method, or DC battery and charging capacity
- Seawater temperature, salinity and intake arrangement
Installation and supply requirement
- Available installation dimensions and service-access route
- Freshwater tank, product-water and reject-water connections
- Newbuild, retrofit or replacement scope
- Required controls, remote panel, flushing and monitoring
- Drawings, photographs, documentation needs and delivery schedule
CLEAR PROJECT ROUTE
From requirement to confirmed supply
No model is treated as a fit until the vessel and current supplier configuration are reviewed.
1. Send vessel data
Share demand, operating schedule, power, seawater conditions, dimensions, drawings and delivery location.
2. Technical comparison
ERBA Marine checks the relevant family, current supplier data, layout and interfaces.
3. Written confirmation
The quotation states the selected configuration, scope, documentation and applicable warranty terms.
4. Supply coordination
Equipment supply and agreed documentation are coordinated through ERBA Marine.
VERIFIED OFFICIAL DOWNLOADS
Manufacturer brochure and selection reference
Open the verified Aqua Prime documents for preliminary review. The selected equipment’s current datasheet and applicable documents are confirmed with the written quotation.
Aqua Prime Water Maker Selection Guide
Verified complete six-page Aqua Prime selection guide in Turkish. ERBA Marine can clarify the project-selection points; current model documentation governs.
FREQUENTLY ASKED QUESTIONS
ECO T/D 320 / ECO T 320 Pro Plus FAQs
Practical answers for selection, replacement planning and quotation.
Aqua Prime’s current product table mixes 320 and 400 L/h while showing 9,600 L/day for both variants, and its general FAQ gives 3 kW running power while the product table gives 3.5 kW. ERBA Marine therefore confirms the selected version from current written documentation.
No. Published Aqua Prime data is used as a preliminary selection reference. ERBA Marine confirms the current model code, electrical configuration, dimensions, included components, documentation and applicable warranty terms in the written quotation.
Yes. Send the existing make and model, production duty, voltage, overall dimensions, connection sizes, photographs and the reason for replacement.
Where the selected family supports more than one arrangement, ERBA Marine will review the available installation space, access route and interface layout before confirming the configuration.
Provide vessel type, daily freshwater demand, operating hours, seawater conditions, electrical supply, installation space, tank arrangement, connection details, drawings and delivery location.
The listed water makers are manufactured by Aqua Prime and selected and supplied through ERBA Marine. The confirmed equipment, documentation, warranty route and after-sales scope are stated in ERBA Marine’s written quotation.
Yes. Aqua Prime states that seawater salinity and temperature affect production, with colder or more saline feed water reducing output. ERBA Marine therefore treats nominal L/h figures as preliminary selection references and confirms the project basis in writing.
Aqua Prime recommends condition-based prefilter inspection and winterisation when the unit will be unused for three weeks or longer, subject to the current supplied manual. It describes approximately five years as an average membrane-life reference under clean-seawater operation with proper prefiltration and maintenance; this is not a warranty.
Yes. Aqua Prime publishes optional downstream UV treatment and remineralisation references. ERBA Marine can review these against the freshwater-tank arrangement and the required supplied scope.
Send the technical requirement
Accurate vessel data helps ERBA Marine compare the current Aqua Prime configuration and prepare a useful quotation.
- State required L/h, daily demand and operating hours.
- Confirm voltage, phase, frequency and available power.
- Share installation dimensions, seawater and tank interfaces.
- Attach drawings, existing data and clear photographs.
Request ECO 320 Review
Fields marked * are required. Drawings, installation photographs and existing equipment details are strongly recommended.
Your technical and contact information is sent only to ERBA Marine’s website enquiry recipients for follow-up.
CONTINUE COMPARING
Related marine water maker pages
Use the dedicated pages to compare the closest current family or model references.
ECO T/D 400 / ECO T 400 Pro Plus
Published production reference: 400 L/h and 9,600 L/day.
DUAL 400 Pro Plus
Twin-unit redundancy concept; combined output and table details require written confirmation.