Home Products Marine Doors & Hatches Marine Hatches Light & Standard Deck Hatches
HTC / HSLM / HFL0 / HSLD REFERENCES
Light and Standard Marine Deck Hatch Families
Review classic, ultra-slim, flush and sliding light deck hatch references with public technical sheets.
Selection boundary: Final size, material, hardware, opening arrangement, rating and applicable documentation are confirmed in ERBA Marine’s written quotation.
Bofor HFL0 flush light deck hatch
Official manufacturer reference image hosted locally by ERBA Marine. The supplied configuration is confirmed in writing.
01
HTC Classic light deck hatch
02
HSLM Ultra Slim — supplier reference 20 mm above deck
03
HFL0 flush reference with supplier mounting notes
04
HSLD sliding light deck hatch
Bofor marine closures, selected and supplied through ERBA Marine
ERBA Marine coordinates technical selection and supply for the agreed marine-door, hatch, custom-closure or component configuration. Included drawings, documents, delivery scope, service support and applicable warranty route are stated in ERBA Marine’s written quotation.
Identity and approval boundary: Bofor is the manufacturer of the referenced products. Approval is never inferred across the range. Classification, fire rating, pressure head, approved dimensions and installation conditions apply only to the exact model and current certificate scope.
SELECTION BEFORE SPECIFICATION
How to approach light & standard deck hatches
Published families and images help identify a starting point; verified vessel and closure data determine the final selection.
Light & Standard Deck Hatches
The light deck range includes HTC Classic, HSLM Ultra Slim, HFL0 flush and HSLD sliding references. The supplier describes HSLM as 20 mm above deck. The HFL0 source specifies a nominal flat surface of ±1 mm, M5 countersunk screws and adding 6 mm to the cut-out when a finishing frame is used.
For HSLD, the supplier source uses the phrase “lezan safety glass.” This page does not reinterpret that as a verified branded or generic material specification; ERBA Marine confirms the exact current glazing in writing.
Information to confirm
- Classic, ultra-slim, flush or sliding operation
- Clear opening and cut-out
- Above-deck projection and operating clearance
- Finishing frame and screw arrangement
- Exact current glazing material
- Current sheet revision and installation suitability
PUBLISHED FAMILY REFERENCES
Light & Standard Deck Hatches families and model-code groups
Compare the published family descriptions below, then send the exact project data for confirmation.
HTC Classic
HTC
Classic light deck hatch reference with public reference sheet.
HSLM Ultra Slim
HSLM
Supplier reference describes a 20 mm above-deck profile.
HFL0 Flush
HFL0
Flush reference with flatness, countersunk-screw and finishing-frame cut-out notes.
HSLD Sliding
HSLD
Sliding light hatch reference; exact current glazing terminology and material confirmed.
Configuration rule: Do not transfer a material, size, dog, handle, glazing, pressure, fire-rating or approval statement from one model code to another. ERBA Marine confirms the exact selected configuration in writing.
OFFICIAL PRODUCT IMAGES
Light & Standard Deck Hatches image gallery
Large contain-fit images preserve the complete product shape. Click an image to open it in the native Elementor lightbox.
Bofor HSLD sliding light deck hatch
Official Bofor reference image for Bofor HSLD sliding light deck hatch. Final size, material, hardware, opening arrangement and applicable documentation are confirmed in writing for the supplied configuration.
Bofor HSLM Ultra Slim light deck hatch
Official Bofor reference image for Bofor HSLM Ultra Slim light deck hatch. Final size, material, hardware, opening arrangement and applicable documentation are confirmed in writing for the supplied configuration.
Bofor HTC Classic light deck hatch
Official Bofor reference image for Bofor HTC Classic light deck hatch. Final size, material, hardware, opening arrangement and applicable documentation are confirmed in writing for the supplied configuration.
CONTROLLED LOCAL DOCUMENTS
Light & Standard Deck Hatches technical references
These locally hosted files support preliminary review. Current revision, validity, exact model scope and project acceptance must be confirmed before use.
Technical Reference
Bofor HFL0 flush light deck hatch reference sheet
Bofor HFL0 flush light deck hatch reference sheet. Reference only: ERBA Marine must confirm the current revision, validity, model/configuration scope and acceptance requirements in writing before quotation or supply.
- Reference only for preliminary coordination
- Current revision and exact model scope must be confirmed
- Do not use as fabrication or class authority without acceptance
Technical Reference
Bofor HSLD sliding light deck hatch reference sheet
Bofor HSLD sliding light deck hatch reference sheet. Reference only: ERBA Marine must confirm the current revision, validity, model/configuration scope and acceptance requirements in writing before quotation or supply.
- Reference only for preliminary coordination
- Current revision and exact model scope must be confirmed
- Do not use as fabrication or class authority without acceptance
Technical Reference
Bofor HSLM Ultra Slim light deck hatch reference sheet
Bofor HSLM Ultra Slim light deck hatch reference sheet. Reference only: ERBA Marine must confirm the current revision, validity, model/configuration scope and acceptance requirements in writing before quotation or supply.
- Reference only for preliminary coordination
- Current revision and exact model scope must be confirmed
- Do not use as fabrication or class authority without acceptance
Technical Reference
Bofor HTC Classic light deck hatch reference sheet
Bofor HTC Classic light deck hatch reference sheet. Reference only: ERBA Marine must confirm the current revision, validity, model/configuration scope and acceptance requirements in writing before quotation or supply.
- Reference only for preliminary coordination
- Current revision and exact model scope must be confirmed
- Do not use as fabrication or class authority without acceptance
TECHNICAL SELECTION DATA
What ERBA Marine needs before confirming a closure
Verified dimensions, location, construction, operation, hardware and documentation reduce avoidable clarification.
Vessel, opening and installation
- Classic, ultra-slim, flush or sliding operation
- Clear opening and cut-out
- Above-deck projection and operating clearance
Configuration, documents and delivery
- Finishing frame and screw arrangement
- Exact current glazing material
- Current sheet revision and installation suitability
Important: Classification, fire rating, pressure head, approved dimensions and installation conditions apply only to the exact model and certificate. ERBA Marine confirms current documentation and the selected configuration in writing before supply.
CLEAR PROJECT ROUTE
From closure requirement to confirmed supply
A reference image or family code is never treated as the final fit until the vessel and exact configuration are reviewed.
1. Share the requirement
Send vessel, opening, location, duty, construction, hardware and document requirements.
2. Match the family
ERBA Marine identifies the closest current marine-door, hatch, closure or component reference.
3. Confirm the configuration
Exact size, material, operation, finish, rating, documents and supply scope are checked.
4. Quote and coordinate
ERBA Marine states delivery, included support and applicable warranty route in writing.
CONTINUE COMPARING
Related marine doors and hatches pages
Use the dedicated pages to compare the closest closure family, technical reference or component route.
Reference Sheets & Installation
Open the public technical references.
FREQUENTLY ASKED QUESTIONS
Light & Standard Deck Hatches FAQs
Practical answers for family comparison, selection, documentation, installation and quotation.
The supplier source states 20 mm above deck. Confirm the exact model drawing, cut-out, deck finish and operating clearance before installation.
The source specifies a nominal flat surface of ±1 mm, M5 countersunk screws and adding 6 mm to the cut-out when a finishing frame is used. Confirm the current sheet and project interface before fabrication.
The supplier source uses the phrase “lezan safety glass.” ERBA Marine will confirm the exact current material and thickness in writing rather than assuming a brand or polymer specification.
They are selection and coordination references only. Confirm current revision, dimensions, tolerances, materials and installation suitability before fabrication.
Custom dimensions and special arrangements may be reviewed, but a change can affect construction, hardware, lead time and approval coverage. Treat the published families as selection references; ERBA Marine confirms the final buildable and documentable configuration in the quotation.
Send the light & standard deck hatches requirement
Accurate opening, vessel, location and duty data helps ERBA Marine compare the current family, configuration and documents and prepare a useful quotation.
- State the clear opening and structural cut-out.
- Describe location, exposure and required closure duty.
- Confirm material, opening direction, glazing and hardware.
- Attach drawings, existing photographs and document requirements.
Light & Standard Deck Hatches Technical Enquiry
Fields marked * are required. Opening dimensions, installation photographs and drawings are strongly recommended.
Your technical and contact information is sent only to ERBA Marine’s website enquiry recipients for follow-up.