Home Products Stainless Steel Yacht Accessories Deck & Mooring Hardware Handrails & Stanchions Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm
PUBLISHED PRODUCT REFERENCE
Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm
This page groups only the approved media and published identity for Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm. Use it for preliminary reference matching; ERBA Marine confirms current drawings, dimensions, material, finish, mounting, included scope and documentation in writing before supply.
- Source reference: P 460 800
- Published nominal: Ø 25 x 810 mm
- Product family: Handrails & Stanchions
- Product-specific technical enquiry below
✓ Ø 25 x 810 mm
✓ P 460 800
✓ 1 approved media view
✓ Final scope confirmed in writing
OFFICIAL PRODUCT MEDIA
1 approved view for this exact reference
All product views, alternate views and technical drawings shown here belong only to the product reference named on this page. Representative fallback media is explicitly disclosed where used.
25 × 810 mm tapered stainless steel guardrail stanchion — Product view
Official-source product view for 25 × 810 mm tapered stainless steel guardrail stanchion. Published reference: P 460 800. Final dimensions, material grade, finish and mounting are confirmed in writing before supply.
REFERENCE FACTS
Published identity and quotation-stage checks
These fields retain the exact source identity without turning preliminary website information into an unverified final specification.
Product identity
Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm
Published source reference
P 460 800
Published nominal
Ø 25 x 810 mm
Source family
Handrails & Stanchions
Material evidence
Exact source page mentions 304 and 316 grades. Final grade and finish are confirmed in writing.
Source-record key
a90-p-460-800-b331
Official source title for traceability: Q 25 x 810 mm Konik Vardevela. ERBA Marine confirms the current product/drawing revision and the complete supplied scope before order.
SELECTION GUIDANCE
What ERBA confirms before quotation
Published references support preliminary identification. The written quotation records the selected reference, confirmed technical details, documents, commercial scope and applicable after-sales route.
Geometry and interface
Send verified dimensions, cut-outs, radii, templates, vessel structure, clearances and orientation.
Material and finish
State the requested stainless grade, polish or other finish, glass or insert and exposure environment.
Duty and mounting
Provide designer-supplied loads where applicable, plus footprint, backing, substrate, fasteners and service access.
Documents and supply scope
List drawings, class or flag requirements, quantity, destination, schedule and required after-sales route.
Information to send
- Vessel type, use, length, build status and operating area
- Exact accessory family, source reference or closest published variant
- Verified dimensions, drawings, templates and clear installation photographs
- Mounting footprint, substrate, backing structure, fasteners and service access
- Material grade, surface finish, glass or insert and corrosion environment
- Designer-supplied working/breaking load, mooring duty or lifting duty where applicable
- Class, flag, owner, yard, inspection and documentation requirements
- Quantity, destination country/port and required project schedule
Manufacturer and ERBA Marine support
Platin manufactures the listed product references. ERBA Marine coordinates selection, technical review, quotation, supply and after-sales routing. Exact material, dimensions, mounting, approvals, documents and warranty scope are confirmed in writing.
TECHNICAL ENQUIRY
Send an enquiry for this exact reference
The exact product name, source reference and page URL are carried in this form. Send the available vessel, geometry, mounting, material, document and delivery details.
- Product or family context carried in the form
- Both technical recipients configured
- Visitor email used as Reply-To
- Drawings and photographs accepted
FREQUENTLY ASKED QUESTIONS
Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm: technical FAQ
These answers distinguish preliminary website references from the current configuration and commercial scope confirmed in writing.
Yes. This page is dedicated to Tapered stainless steel guardrail stanchion — Ø 25 x 810 mm and groups only its approved product, alternate and drawing media. The published identity is P 460 800.
No. They support preliminary identification. Current drawings, final dimensions, included scope and documentation are confirmed in ERBA Marine’s written quotation.
Exact source page mentions 304 and 316 grades. ERBA Marine confirms the selected grade, finish and any glass or insert in the written quotation.
Custom manufacture may be possible after a drawing, template or vessel measurement review. It is subject to written technical acceptance and quotation.
Send the exact source reference if known, verified opening and overall dimensions, clear photographs, mounting details, vessel information and any drawing or documentation requirement.
No blanket approval claim is made. Current evidence, validity and exact product/configuration scope must be confirmed before any approval is stated or supplied.
Only when explicitly included in ERBA Marine’s written quotation. The responsible designer or yard remains responsible for the vessel structure and installation acceptance unless otherwise agreed.
The applicable manufacturer warranty terms and ERBA Marine after-sales route for the quoted supply are stated in the written quotation. No fixed website warranty duration is promised.
RELATED REFERENCES
Other products in handrails & stanchions
Compare nearby published references, or return to the family selector to view the complete range.
Tapered stainless steel guardrail stanchion — Ø 25 × 710 mm
Tapered stainless steel guardrail stanchion — Ø 25 x 610 mm
Stainless steel guardrail stanchion base — Ø 32 mm
Stainless steel guardrail stanchion base — Ø 25 mm
Stainless steel guardrail gate-entry stanchion — Ø 25 x 810 mm
