SINGLE GENSET
Single-Generator Control Modules
Manual start, automatic start and automatic mains or shore-source failure control for one marine generator.
- 12 current model or support pages
- Start here for a standalone auxiliary generator, replacement control panel or a single-set package that does not parallel with another generator.
- Selection confirmed against the vessel power-system design
MANUFACTURER REFERENCE
Deep Sea Electronics (DSE)
ERBA MARINE ROLE
Marine generator controller selection, panel integration, project supply and technical enquiry support.
QUOTATION BOUNDARY
Deep Sea Electronics product names and technical references identify the manufacturer and source range. ERBA Marine is the project enquiry and supply contact. Final make, model, configuration, firmware, documentation, warranty, delivery and service scope are confirmed only in ERBA Marine's written quotation.
SINGLE GENSET
Current Single-Generator Control Modules
Start here for a standalone auxiliary generator, replacement control panel or a single-set package that does not parallel with another generator.
Compact automatic mains or shore-source failure controller that can also be configured for automatic-start duty.
- Configurable for AMF or auto-start operation
- 140 × 113 × 43 mm overall
- 118 × 92 mm panel cut-out
Compact next-generation single-genset controller family configurable for remote-start or AMF applications.
- Remote-start or AMF configuration
- DSEG4501 variant adds RS485
- Generator and load power monitoring
Manual or automatic-start controller for a single genset or engine-only application using a non-electronic engine.
- Manual or auto-start modes
- Single genset or engine-only use
- Designed for non-electronic engines
Automatic mains or shore-source failure controller for a single diesel or gas generator set.
- Automatic mains-failure control
- Single diesel or gas genset
- 216 × 158 × 43 mm overall
Automatic-start controller with engine monitoring, protection and configurable I/O for one generator set.
- Automatic-start operation
- Electronic CAN and non-electronic engine support
- USB and DSENet connectivity
Automatic mains or shore-source failure controller with extensive engine monitoring and protection for one genset.
- Automatic mains-failure control
- Electronic CAN and non-electronic engine support
- Flexible inputs, outputs and engine protections
Advanced automatic-start controller with broad communications, expansion and programmable-logic capability.
- Automatic-start control
- USB, RS232, RS485 and DSENet
- CAN and non-electronic engine support
Advanced AMF controller adding source monitoring and transfer control to the DSE7300-series feature set.
- Generator and mains or shore-source monitoring
- USB, RS232, RS485 and DSENet
- Remote communications and PLC functions
High-feature automatic-start controller with Ethernet, serial communications, expansion and SNMP capability.
- Automatic-start control
- USB, RS232, RS485, Ethernet and DSENet
- SNMP and PLC functionality
High-feature AMF controller with Ethernet, serial communications, expansion, SNMP and source monitoring.
- Generator and mains or shore-source monitoring
- USB, RS232, RS485, Ethernet and DSENet
- SNMP, PLC and dual mutual standby functions
Current G-Series controller configurable for remote start or AMF with USB, RS485 and DSENet expansion.
- Remote-start or AMF configuration
- USB, RS485 and DSENet
- CAN and non-electronic engine support
Current G-Series remote-start and AMF controller adding Ethernet and SNMP to broad single-set control features.
- Remote-start and AMF operation
- USB, RS485, Ethernet and DSENet
- SNMP, PLC and dual mutual standby functions
TECHNICAL SELECTION
Information needed before controller selection
Start here for a standalone auxiliary generator, replacement control panel or a single-set package that does not parallel with another generator.
- Generator quantity and duty: standby, prime, parallel or load-demand operation
- Generator kVA/kW, voltage, phase, frequency and alternator details
- Engine make/model, ECU or conventional sensors, starting voltage and wiring information
- Breaker arrangement, bus sections, shore or mains source and permitted operating modes
- Required synchronising, kW/kVAr sharing, governor and AVR interfaces
- Alarm, shutdown, metering, I/O, CAN/J1939, Modbus, Ethernet or remote-monitoring requirements
- Panel cut-out, enclosure/IP needs, classification/flag documentation and delivery schedule
PROJECT PROCESS
From vessel data to a controlled quotation
A short engineering review prevents the wrong control role, incompatible cut-out or missing interface from entering the order.
1. Share the power-system arrangement
Send the single-line diagram, generator and engine details, source/bus arrangement and the controller being replaced, if any.
2. Confirm the control role
ERBA reviews start/stop, AMF, synchronising, load-sharing, ATS, bus-tie, display and expansion requirements.
3. Check interfaces and documents
Governor, AVR, CAN, sensors, I/O, communications, panel cut-out and project-document needs are checked before selection.
4. Receive the project quotation
The written quotation confirms the proposed model, configuration scope, included documents, delivery and commercial terms.
GENERATOR CONTROL FAQ
Frequently asked questions
Current-model guidance and the information ERBA needs before confirming a marine generator control solution.
Start here for a standalone auxiliary generator, replacement control panel or a single-set package that does not parallel with another generator. Send the generator, engine, electrical and switchboard details so ERBA can check the correct control role before quotation.
The DSE8610 MKII is ERBA’s core current choice for generator-to-generator synchronising and load sharing. DSE8620 MKII, DSE8660 MKII and DSE8680 cover different shore or mains, ATS and bus-tie roles, while the DSEG8-Series is considered for more complex systems.
Yes, as a technical retrofit enquiry. Send the existing controller model, panel photographs, wiring drawings, engine and alternator details, breaker arrangement and required operating sequence. A replacement is not assumed to be pin-compatible until the interfaces are checked.
The current DSE products shown are generator-control products that may be selected for marine generator projects. Vessel, flag, classification, EMC, enclosure and documentation requirements must be reviewed for the specific installation; the page does not claim blanket marine approval.
Provide generator quantity and rating, voltage/phase/frequency, engine and alternator details, DC supply, sensor or CAN interface, breakers and bus arrangement, shore or mains source, required communications, panel dimensions, existing drawings and delivery location.
Configuration, panel integration, drawings, testing, commissioning support and included accessories vary by project. ERBA’s written quotation will state the exact controller, programming and supply scope; no default commissioning scope is implied by the catalogue page.
TECHNICAL ENQUIRY
Send the generator and switchboard requirements
The form routes the exact page and model context to ERBA Marine. Attach wiring drawings, controller and engine nameplates, single-line diagrams and panel photographs where available.
- Controller selection and compatibility review
- New panel, retrofit and replacement enquiries
- Single-set, AMF, synchronising and G8 projects
- Written scope confirmation before supply