Home Products Marine Doors & Hatches Closure Hardware & Accessories Marine Door & Hatch Gaskets
Product Category
Marine Door & Hatch Gaskets
Compare the published marine door & hatch gaskets scope, local official references and the exact project data ERBA Marine needs before confirming supply.
Selection boundary: Final size, material, hardware, opening arrangement, rating and applicable documentation are confirmed in ERBA Marine’s written quotation.
Bofor watertight marine door and hatch gaskets
Official manufacturer reference image hosted locally by ERBA Marine. The supplied configuration is confirmed in writing.
01
Official Bofor reference content is hosted locally by ERBA Marine.
02
Approved category and family boundaries remain explicit.
03
Final configuration and current availability are quotation-controlled.
04
Approval claims require current exact-scope documentation.
Bofor marine closures, selected and supplied through ERBA Marine
ERBA Marine coordinates technical selection and supply for the agreed marine-door, hatch, custom-closure or component configuration. Included drawings, documents, delivery scope, service support and applicable warranty route are stated in ERBA Marine’s written quotation.
Identity and approval boundary: Bofor is the manufacturer of the referenced products. Approval is never inferred across the range. Classification, fire rating, pressure head, approved dimensions and installation conditions apply only to the exact model and current certificate scope.
SELECTION BEFORE SPECIFICATION
How to approach marine door & hatch gaskets
Published families and images help identify a starting point; verified vessel and closure data determine the final selection.
Marine Door & Hatch Gaskets
Marine Door & Hatch Gaskets collects the approved product families or item cards for this selection route. Codes and official-reference media are kept with their own descriptions so construction, option, duty and approval statements are not borrowed from another family.
Compare the entries below and submit the complete opening or replacement data. Where the category is enquiry-only, the page deliberately requests project inputs instead of inventing a specification.
Information to confirm
- Exact closure family/model and visible accessory code
- Face, side and installed photographs with fixing, shaft, groove or linkage measurements
- Vessel type, project stage, installation location and exposure
- Verified clear opening, structural cut-out and corner radii in millimetres
- Surrounding structure, frame interface, available depth and drainage
- Hinge side, opening direction, travel envelope and access constraints
- Preferred material, finish, insulation, glazing or teak arrangement
- Locks, dogs, handles, closers, stoppers and emergency operation
- Required weathertight, watertight, fire, class or flag duty
- Required drawings, certificates, calculations and installation documents
- Existing model code, photographs and measurements for replacements
- Quantity, delivery country or port and required schedule
PUBLISHED FAMILY REFERENCES
Marine Door & Hatch Gaskets families and model-code groups
Compare the published family descriptions below, then send the exact project data for confirmation.
LMZ / clamping porthole gasket
G01
EPDM-20 JIS source reference; confirm groove/channel dimensions and replacement sample.
Classic / slim hatch gasket
G02
EPDM-50 & 30 JIS source reference; confirm hatch model, channel and compressed section.
Flush hatch gasket
G03
EPDM-20 JIS source reference; confirm hatch family and channel dimensions.
Lightweight flush hatch gasket
G04
EPDM-50 & 30 JIS source reference; confirm HFL0/HF model and channel dimensions.
D00 / DH00 / D01 door gasket
G05
EPDM-40 JIS source reference; confirm exact door code, groove and corner arrangement.
Watertight door gasket
G06
EPDM-30 JIS source reference; confirm exact door family, channel and compression.
Steel hatch / door gasket
G07
EPDM-25 JIS source reference; confirm product code and channel dimensions.
HDxx cast-hatch gasket
G08
EPDM-35 JIS source reference; confirm cast-hatch code and groove dimensions.
Watertight door / hatch gasket
G09
EPDM-30 JIS source reference; confirm exact closure and channel dimensions.
Configuration rule: Do not transfer a material, size, dog, handle, glazing, pressure, fire-rating or approval statement from one model code to another. ERBA Marine confirms the exact selected configuration in writing.
PUBLISHED SELECTION DATA
Marine Door & Hatch Gaskets model and configuration references
Use these published references for preliminary comparison. ERBA Marine confirms current availability, final dimensions, compatibility and controlled documents in writing.
Published gasket compatibility references
| Code | Published compatibility | Source material reference |
|---|---|---|
| G01 | LMZ / clamping porthole | EPDM-20 JIS |
| G02 | Classic / slim hatch | EPDM-50 & 30 JIS |
| G03 | Flush hatch | EPDM-20 JIS |
| G04 | Lightweight flush hatch | EPDM-50 & 30 JIS |
| G05 | D00 / DH00 / D01 weathertight door | EPDM-40 JIS |
| G06 | Watertight door | EPDM-30 JIS |
| G07 | Steel hatch / door | EPDM-25 JIS |
| G08 | HDxx cast hatch | EPDM-35 JIS |
| G09 | Watertight door / hatch | EPDM-30 JIS |
Selection note: Confirm the exact product code, groove/channel dimensions, compressed section and a replacement sample or measured profile before supply.
TECHNICAL SELECTION DATA
What ERBA Marine needs before confirming a closure
Verified dimensions, location, construction, operation, hardware and documentation reduce avoidable clarification.
Vessel, opening and installation
- Exact closure family/model and visible accessory code
- Face, side and installed photographs with fixing, shaft, groove or linkage measurements
- Vessel type, project stage, installation location and exposure
- Verified clear opening, structural cut-out and corner radii in millimetres
- Surrounding structure, frame interface, available depth and drainage
- Hinge side, opening direction, travel envelope and access constraints
Configuration, documents and delivery
- Preferred material, finish, insulation, glazing or teak arrangement
- Locks, dogs, handles, closers, stoppers and emergency operation
- Required weathertight, watertight, fire, class or flag duty
- Required drawings, certificates, calculations and installation documents
- Existing model code, photographs and measurements for replacements
- Quantity, delivery country or port and required schedule
Important: Classification, fire rating, pressure head, approved dimensions and installation conditions apply only to the exact model and certificate. ERBA Marine confirms current documentation and the selected configuration in writing before supply.
CLEAR PROJECT ROUTE
From closure requirement to confirmed supply
A reference image or family code is never treated as the final fit until the vessel and exact configuration are reviewed.
1. Share the requirement
Send vessel, opening, location, duty, construction, hardware and document requirements.
2. Match the family
ERBA Marine identifies the closest current marine-door, hatch, closure or component reference.
3. Confirm the configuration
Exact size, material, operation, finish, rating, documents and supply scope are checked.
4. Quote and coordinate
ERBA Marine states delivery, included support and applicable warranty route in writing.
CONTINUE COMPARING
Related marine doors and hatches pages
Use the dedicated pages to compare the closest closure family, technical reference or component route.
Closure Hardware & Accessories
Continue with the approved closure hardware & accessories route.
Marine Door Locks & Handles
Continue with the approved marine door locks & handles route.
Custom Marine Closures & Design Gallery
Use this support page for project data, documentation or installation coordination.
Approvals & Installation Guidance
Use this support page for project data, documentation or installation coordination.
FREQUENTLY ASKED QUESTIONS
Marine Door & Hatch Gaskets FAQs
Practical answers for family comparison, selection, documentation, installation and quotation.
Start with the published family, model or item references on this page, then provide the verified opening, location, structure, duty, operation and document requirements. ERBA Marine confirms the exact selected configuration in writing.
No. Published dimensions, model codes, images and options support preliminary comparison. Current availability, final cut-out, material, finish, hardware and compatibility are confirmed in the quotation before fabrication or supply.
No. An image is a visual reference only, and a certificate applies only to its exact model, revision, construction, limits and installation conditions. ERBA Marine reconfirms current exact-scope documentation for the selected item.
Customisation depends on the product family and project. Send drawings, opening and cut-out dimensions, surrounding structure, operation, glazing or finish, hardware, required duty and schedule for technical review.
Include vessel and installation location, clear opening and cut-out, hinge/opening direction, photographs or drawings, material and finish preference, hardware, rating/document requirements, quantity, delivery point and schedule.
Send the marine door & hatch gaskets requirement
Accurate opening, vessel, location and duty data helps ERBA Marine compare the current family, configuration and documents and prepare a useful quotation.
- State the clear opening and structural cut-out.
- Describe location, exposure and required closure duty.
- Confirm material, opening direction, glazing and hardware.
- Attach drawings, existing photographs and document requirements.
Marine Door & Hatch Gaskets Technical Enquiry
Fields marked * are required. Opening dimensions, installation photographs and drawings are strongly recommended.
Your technical and contact information is sent only to ERBA Marine’s website enquiry recipients for follow-up.