ERBA Marine FZE logo
Enquiry
G8 BUS-TIE / LOAD-SWITCH CONTROL

DSEG8680 Generator Controller

Configurable G8 bus-tie or load-switch controller for synchronising bus segments in an advanced DSEG8xxx system.

  • Bus-tie or load-switch configuration
  • Works with DSEG8600 and DSEG8660 system roles
  • AMSC communications
  • 250 × 189 × 50.5 mm overall
  • 220 × 160 mm panel cut-out
Request Technical Review
WhatsApp Enquiry
Deep Sea Electronics DSEG8680 generator control product
DSE product reference; final configuration is quotation-specific.
MANUFACTURER REFERENCE

Deep Sea Electronics (DSE)

ERBA MARINE ROLE

Marine generator controller selection, panel integration, project supply and technical enquiry support.

QUOTATION BOUNDARY

Deep Sea Electronics product names and technical references identify the manufacturer and source range. ERBA Marine is the project enquiry and supply contact. Final make, model, configuration, firmware, documentation, warranty, delivery and service scope are confirmed only in ERBA Marine's written quotation.

Deep Sea Electronics DSEG8680 generator control product
CURRENT DSE REFERENCE

Where DSEG8680 fits

Multi-bus marine switchboards where G8 generator and source controllers must coordinate bus sections.

  • Bus-tie or load-switch configuration
  • Works with DSEG8600 and DSEG8660 system roles
  • AMSC communications
  • 250 × 189 × 50.5 mm overall
  • 220 × 160 mm panel cut-out

Reference boundary: Official DSE product reference checked 2026-08-24. Product revisions, firmware, variants and compatibility remain subject to the manufacturer and ERBA's written quotation.

ENGINEERING BOUNDARY

Selection is system-specific

  • Not a blanket marine, flag or class approval claim
  • Governor, AVR, CAN, sensors, I/O and breaker logic must be confirmed
  • Mains functions are applied to shore-source arrangements only where the vessel design permits
  • Programming, drawings, panel build, testing and commissioning scope are quotation-specific
TECHNICAL SELECTION

Information needed before controller selection

Multi-bus marine switchboards where G8 generator and source controllers must coordinate bus sections.

  • Generator quantity and duty: standby, prime, parallel or load-demand operation
  • Generator kVA/kW, voltage, phase, frequency and alternator details
  • Engine make/model, ECU or conventional sensors, starting voltage and wiring information
  • Breaker arrangement, bus sections, shore or mains source and permitted operating modes
  • Required synchronising, kW/kVAr sharing, governor and AVR interfaces
  • Alarm, shutdown, metering, I/O, CAN/J1939, Modbus, Ethernet or remote-monitoring requirements
  • Panel cut-out, enclosure/IP needs, classification/flag documentation and delivery schedule
GENERATOR CONTROL FAQ

Frequently asked questions

Current-model guidance and the information ERBA needs before confirming a marine generator control solution.

Multi-bus marine switchboards where G8 generator and source controllers must coordinate bus sections. Final suitability depends on the complete generator, engine, breaker, bus, source and project-document requirements.

The DSE8610 MKII is ERBA’s core current choice for generator-to-generator synchronising and load sharing. DSE8620 MKII, DSE8660 MKII and DSE8680 cover different shore or mains, ATS and bus-tie roles, while the DSEG8-Series is considered for more complex systems.

Yes, as a technical retrofit enquiry. Send the existing controller model, panel photographs, wiring drawings, engine and alternator details, breaker arrangement and required operating sequence. A replacement is not assumed to be pin-compatible until the interfaces are checked.

The current DSE products shown are generator-control products that may be selected for marine generator projects. Vessel, flag, classification, EMC, enclosure and documentation requirements must be reviewed for the specific installation; the page does not claim blanket marine approval.

Provide generator quantity and rating, voltage/phase/frequency, engine and alternator details, DC supply, sensor or CAN interface, breakers and bus arrangement, shore or mains source, required communications, panel dimensions, existing drawings and delivery location.

Configuration, panel integration, drawings, testing, commissioning support and included accessories vary by project. ERBA’s written quotation will state the exact controller, programming and supply scope; no default commissioning scope is implied by the catalogue page.

TECHNICAL ENQUIRY

Send the generator and switchboard requirements

The form routes the exact page and model context to ERBA Marine. Attach wiring drawings, controller and engine nameplates, single-line diagrams and panel photographs where available.

  • Controller selection and compatibility review
  • New panel, retrofit and replacement enquiries
  • Single-set, AMF, synchronising and G8 projects
  • Written scope confirmation before supply